HERTZ CP1.2K
General Specs
-Channels: 1, Amp class: D
POWER SUPPLY
-Nominal power supply voltage (fuse): 11 ÷ 15 VDC (2 x 35 A)
-Operating power supply voltage: 9 ÷ 18 VDC
-Idling current: 0.85 A
-Standby current draw: 4.5 uA
-Consumption, MIN load impedance (Max Musical Power): 50 A
-Remote IN: 4 ÷ 17 VDC (1 mA)
-ART - Automatic Remote Turn on/off from SPK-IN (BTL radio only): 1.5 VDC
-Efficiency: 89%
AMPLIFIER STAGE
-Distortion - THD @ 100 Hz, 70% Rated Power: 0,03 %
-Damping factor @ 1 kHz, 1W: 140
-Bandwidth @ -3 dB: 10 Hz ÷ 500 Hz
-S/N ratio (A-weighted @ 1 V Input): 102 dBA
-Minimum load impedance @ 1 Ch: 2 Ω
-Adjustable Crossovers: yes
Output Power
-Output power (RMS) @ 1% THD: 1Ch @ 4Ω: 650 W x 1, 1Ch @ 2Ω: 1200 W x 1, Total Power: 1200 W
INPUTS / FILTERS
-Inputs: Pre-In / Speaker-In
-Pre Out Hi-Pass: 50 ÷ 250Hz @ 12 dB/Oct.
-Pre-In sensitivity: 0.32 ÷ 8 VRMS
-Speaker-In sensitivity: 1.6 ÷ 40 VRMS
-Sub Ch Lo-Pass: OFF / 50 ÷ 250 Hz @ 24 dB/Oct.
-Bass Boost: 50Hz 0 ÷ 9 dB
-Subsonic Hi-Pass: OFF / 25 Hz @ 24 dB/Oct.
-Sub Remote Volume Control: -20 ÷ 6 dB (Active on Rear Ch with LPF ON)
Audio
| Built-in Speakers |
No |
| Speaker Configuration |
No |
| Built-in Speakers |
No |
| Speaker Configuration |
No |
Advanced Features
| Built-in Speakers |
No |
| Speaker Configuration |
No |
| Built-in Speakers |
No |
| Speaker Configuration |
No |
| Built-in Speakers |
No |
| Speaker Configuration |
No |
| Built-in Speakers |
No |
| Speaker Configuration |
No |